Summary
Creates closed volumes that model shadows cast by each feature using sunlight for a given date and time.
Usage
Polygon and line features can be used as input if they are extruded 3D layers. Extrusion properties can be applied to a feature layer in ArcScene or ArcGlobe and have the effect of transforming the feature into a multipatch.
All input features should reside in the same locale, as relative sun position calculations are based on the position of the first feature in the first feature class.
Shadows modeling sunrise and sunset conditions can be made by providing only a date in the Start Date and Time and End Date and Time parameters, respectively. Shadow volumes will not be produced if the sun is not visible for a given date and time or if the relative position of the sun is at a vertical angle of 90 degrees from the input features.
Shadows are modeled as closed multipatches created by extruding the input features in the direction of sunlight. Light rays are considered to be parallel and travel in the direction calculated for the relative position of the sun. Each shadow volume starts and ends at a vertical plane that is perpendicular to the horizontal projection of the sun's rays.
The following fields will be attributed to the shadow volume features:
- SOURCE—Name of the feature class casting the shadow volume.
- SOURCE_ID—Unique ID of the feature casting the shadow volume.
- DATE_TIME—Local date and time used to calculate sun position.
- AZIMUTH—Angle in degrees between true north and the perpendicular projection of the sun's relative position down to the earth's horizon. Values range from 0 to 360.
- VERT_ANGLE—Angle in degrees between the earth's horizon and the sun's relative position where the horizon defines 0 degrees and 90 degrees is directly above.
Syntax
SunShadowVolume_3d (in_features, start_date_and_time, out_feature_class, {adjusted_for_dst}, {time_zone}, {end_date_and_time}, {iteration_interval}, {iteration_unit})| Parameter | Explanation | Data Type |
in_features [in_features,...] | The multipatch features that will be used to model shadows. Polygon and line features can also be used if they are added as an extruded 3D layer. | Feature Layer |
start_date_and_time | The date and time that the trajectory of sunlight will be calculated for modeling the shadows. | Date |
out_feature_class | The multipatch feature class that will store the resulting shadow volumes. | Feature Class |
adjusted_for_dst (Optional) | Specifies if time value is adjusted for Daylight Savings Time (DST).
| Boolean |
time_zone (Optional) | The time zone in which the participating input is located. The default setting is the time zone to which the operating system is set. | String |
end_date_and_time (Optional) | The final date and time for calculating sun position. If only a date is provided, the final time is presumed to be sunset. | Date |
iteration_interval (Optional) | The value used to define the iteration of time from the start date. | Double |
iteration_unit (Optional) | The unit that defines the iteration value applied to the Start Date and Time.
| String |
Code Sample
SunShadowVolume example 1 (Python window)
The following sample demonstrates the use of this tool in the Python window.
import arcpy
from arcpy import env
arcpy.CheckOutExtension('3D')
env.workspace = 'C:/data'
arcpy.SunShadowVolume_3d(['sample.fgdb/buildings_1', 'buildings_2.shp'],
'12/25/2011 10:00 AM', 'shadows_dec25.shp',
'ADJUSTED_FOR_DST', 'Eastern_Standard_Time',
'12/25/2011 3:00 PM', 'HOURS', 1)
SunShadowVolume example 2 (stand-alone script)
The following sample demonstrates the use of this tool in a stand-alone Python script.
'''*********************************************************************
Name: Model Shadows For GeoVRML Models
Description: Creates a model of the shadows cast by GeoVRML models
imported to a multipatch feature class for a range of dates
and times. A range of times from the start time and end
time can also be specified by setting the EnforceTimes
Boolean to True. This sample is designed to be used in a
script tool.
*********************************************************************'''
# Import system modules
import arcpy
from datetime import datetime, time, timedelta
#************************* Script Variables **************************
inFiles = arcpy.GetParameterAsText(0) # list of input features
spatialRef = arcpy.GetParameterAsText(1) # list of GeoVRML files
outFC = arcpy.GetParameterAsText(2) # multipatch from 3D files
inTimeZone = arcpy.GetParameterAsText(3) # time zone
startDate = arcpy.GetParameter(4) # starting date as datetime
endDate = arcpy.GetParameter(5) # ending date as datetime
dayInterval = arcpy.GetParameter(6) # day interval as long (0-365)
minInterval = arcpy.GetParameter(7) # minute interval as long (0-60)
enforceTime = arcpy.GetParameter(8) # minute interval as Boolean
outShadows = arcpy.GetParameterAsText(9) # output shadow models
outIntersection = arcpy.GetParameterAsText(10) # shadow & bldg intersection
# Function to find all possible date/time intervals for shadow modelling
def time_list():
dt_result = [startDate]
if dayInterval:
if endDate: #Defines behavior when end date is supplied
while startDate < endDate:
startDate += timedelta(days=dayInterval)
dt_result.append(startDate)
dt_result.append(endDate)
else: # Behavior when end date is not given
daymonthyear = datetime.date(startDate)
while startDate <= datetime(daymonthyear.year, 12, 31, 23, 59):
startDate += timedelta(days=dayInterval)
dt_result.append(startDate)
return dt_result
try:
arcpy.CheckOutExtension('3D')
importFC = arcpy.CreateUniqueName('geovrml_import', 'in_memory')
# Import GeoVRML files to in-memory feature
arcpy.ddd.Import3DFiles(inFiles, importFC, 'ONE_FILE_ONE_FEATURE',
spatialRef, 'Z_IS_UP', 'wrl')
# Ensure that building models are closed
arcpy.ddd.EncloseMultiPatch(importFC, outFC, 0.05)
# Discard in-memory feature
arcpy.management.Delete(importFC)
dt_result = time_list()
for dt in dt_result:
if dt == dt_result[0]:
shadows = outShadows
else:
shadows = arcpy.CreateUniqueName('shadow', 'in_memory')
arcpy.ddd.SunShadowVolume(outFC, dt, shadows, 'ADJUST_FOR_DST',
inTimeZone, '', minInterval, 'MINUTES')
if dt is not dt_result[0]:
arcpy.management.Append(shadows, outShadows)
arcpy.management.Delete(shadows)
arcpy.ddd.Intersect3D(outFC, outIntersection, outShadows, 'SOLID')
arcpy.CheckInExtension('3D')
except arcpy.ExecuteError:
print arcpy.GetMessages()
except:
# Get the traceback object
tb = sys.exc_info()[2]
tbinfo = traceback.format_tb(tb)[0]
# Concatenate error information into message string
pymsg = "PYTHON ERRORS:\nTraceback info:\n{0}\nError Info:\n{1}"\
.format(tbinfo, str(sys.exc_info()[1]))
msgs = "ArcPy ERRORS:\n {0}\n".format(arcpy.GetMessages(2))
# Return python error messages for script tool or Python Window
arcpy.AddError(pymsg)
arcpy.AddError(msgs)
Environments
Licensing Information
- ArcGIS for Desktop Basic: Requires 3D Analyst
- ArcGIS for Desktop Standard: Requires 3D Analyst
- ArcGIS for Desktop Advanced: Requires 3D Analyst