Summary
Simplifies polygon outlines by removing relatively extraneous vertices while preserving essential shape.
Learn more about how Simplify Line and Simplify Polygon work
Usage
This tool employs different simplification algorithms for different purposes:
- The POINT_REMOVE algorithm works by identifying and removing relatively redundant vertices to simplify data for display at smaller scales. It is the fastest of the simplification algorithm in this tool. This algorithm is often used for data compression or for coarse simplification. The angularity of the resulting polygon outline increases significantly as the tolerance increases. This algorithm is based on the Douglas-Peucker algorithm: Douglas, David and Peucker, Thomas, "Algorithms for the reduction of the number of points required to represent a digitized line or its caricature," The Canadian Cartographer 10(2), 112–122 (1973).
- The BEND_SIMPLIFY algorithm works by identifying and eliminating relatively insignificant bends to simplify data for display at smaller scales. It is typically more faithful to the input geometry than the POINT_REMOVE algorithm but can take more time to process. It is slower but typically produces results that are more faithful to the original features. It operates by eliminating insignificant bends along polygon outlines. This algorithm is based on the algorithm defined in Wang, Zeshen and Müller, Jean-Claude, "Line Generalization Based on Analysis of Shape Characteristics," Cartography and Geographic Information Systems 25(1), 3–15 (1998).
- The WEIGHTED_AREA algorithm works by first identifying triangles of effective area for each vertex. Those triangles are then weighted by a set of metrics to compare the flatness, skewness, and convexity of each area. The weighted areas guide the removal of their corresponding vertices to simplify the polygon outline while retaining as much character as possible. This algorithm is based on the algorithm defined in Zhou, Sheng and Jones, Christopher B., (2005) Shape-Aware Line Generalisation with Weighted Effective Area" in Fisher, Peter F. (Ed.) Developments in Spatial Handling 11th International Symposium on Spatial Handling, 369–80.
The Simplification Tolerance parameter value determines the degree of simplification. The larger the tolerance, the more coarse the resulting geometry is. Smaller tolerances generate geometry more faithful to the input. MinSimpTol and MaxSimpTol fields are added to the output to store the tolerance that was used.
- For the POINT_REMOVE algorithm, the tolerance is the maximum allowable perpendicular distance between each vertex and the new line created.
- For the BEND_SIMPLIFY algorithm, the tolerance is the diameter of a circle that approximates a significant bend.
- For the WEIGHTED_AREA algorithm, the square of the tolerance is the area of a significant triangle defined by three adjacent vertices.
Any polygons that are smaller than the Minimum Area parameter are removed from the output feature class. For a group of adjacent polygons that share common edges, the minimum area applies to the total area of the group. Use the Keep collapsed points parameter to retain a record of removed polygons as point features.
Multipart polygons are simplified as individual parts.
Use the Keep collapsed points parameter (collapsed_point_option in Python) to create an output point feature class to store points that represent any polygons that were removed because they are below the minimum area. The point output is derived; it will use the same name and location as the Output feature class parameter (out_feature_class in Python) but with a _Pnt suffix. The output polygon feature class contains all the fields present in the input feature class. The output point feature class does not contain any of these fields.
The output polygon feature class is topologically correct. Any topological errors in the input data are flagged in the output polygon feature class. The output feature class includes two additional fields: InPoly_FID and SimPgnFlag that contain the input feature IDs and topological errors of the input, respectively. A SimPgnFlag value of 1 indicates a topological error is present; 0 (zero) indicates that no errors are present..
Use the Input barrier layers parameter to identify features that must not be crossed by simplified polygons. Barrier features can be points, lines, or polygons.
Processing large datasets may exceed memory limitations. In this case, consider processing input data by partition by identifying a relevant polygon feature class in the Cartographic Partitions environment setting. Portions of the data defined by partition boundaries will be processed sequentially. The resulting output feature class will be seamless and consistent at partition edges. See Generalizing large datasets using partitions for more information.
Syntax
SimplifyPolygon_cartography (in_features, out_feature_class, algorithm, tolerance, {minimum_area}, {error_option}, {collapsed_point_option}, {in_barriers})| Parameter | Explanation | Data Type |
in_features | The input polygon features to be simplified. | Feature Layer |
out_feature_class | The simplified output polygon feature class. It contains all fields present in the input feature class. The output polygon feature class is topologically correct. The tool does not introduce topology errors, but topological errors in the input data are flagged in the output polygon feature class. The output feature class includes two additional fields: InPoly_FID and SimPgnFlag to contain the input feature IDs and the input topological errors, respectively. A SimPgnFlag value of 1 indicates an input topological error is present; 0 (zero) indicates that no input error is present. | Feature Class |
algorithm | Specifies the polygon simplification algorithm.
| String |
tolerance | The tolerance determines the degree of simplification. You can choose a preferred unit; otherwise, the units of the input will be used. MinSimpTol and MaxSimpTol fields are added to the output to store the tolerance that was used when processing occurred.
| Linear Unit |
minimum_area (Optional) | Sets the minimum area for a polygon to be retained. The default value is zero, that is, to keep all polygons. You can choose a preferred unit for the specified value; otherwise, units of the input will be used. | Areal Unit |
error_option (Optional) | String | |
collapsed_point_option (Optional) | Dictate whether to create an output point feature class to store the centers of any polygons removed because they are smaller than the minimum_area parameter. The point output is derived; it will be named the same as the polygon output feature class you specify with the out_feature_class parameter but with a _Pnt suffix, located in the same folder.
| Boolean |
in_barriers [in_barriers,...] (Optional) | Inputs containing features to act as barriers for simplification. Resulting simplified polygons will not touch or cross barrier features. For example, when simplifying forested areas, the resulting simplified forest polygons do not cross road features defined as barriers. | Feature Layer |
Code sample
SimplifyPolygon example (Python window)
The following Python window script demonstrates how to use the SimplifyPolygon tool in immediate mode.
import arcpy
import arcpy.cartography as CA
arcpy.env.workspace = "C:/data"
CA.SimplifyPolygon("soils.shp", "C:/output/output.gdb/simplified_soils", "POINT_REMOVE", 100)
SimplifyPolygon example 2 (stand-alone script)
The following stand-alone script demonstrates how to use the SimplifyPolygon tool.
# Name: SimplifyPolygon_Example2.py
# Description: Eliminate small islands before simplifying and smoothing lake boundaries
# Import system modules
import arcpy
import arcpy.management as DM
import arcpy.cartography as CA
# Set environment settings
arcpy.env.workspace = "C:/data/Portland.gdb/Hydrography"
# Set local variables
inLakeFeatures = "lakes"
eliminatedFeatures = "C:/data/PortlandOutput.gdb/lakes_eliminated"
simplifiedFeatures = "C:/data/PortlandOutput.gdb/lakes_simplified"
smoothedFeatures = "C:/data/PortlandOutput.gdb/lakes_smoothed"
# Eliminate small islands in lake polygons.
DM.EliminatePolygonPart(inLakeFeatures, eliminatedFeatures, 100, "OR", 0, "CONTAINED_ONLY")
# Simplify lake polygons.
CA.SimplifyPolygon(eliminatedFeatures, simplifiedFeatures, "POINT_REMOVE", 50, 200, #, "KEEP_COLLAPSED_POINTS")
# Smooth lake polygons.
CA.SmoothPolygon(simplifiedFeatures, smoothedFeatures, "PAEK", 100, "FLAG_ERRORS")
Environments
Licensing information
- ArcGIS Desktop Basic: No
- ArcGIS Desktop Standard: Yes
- ArcGIS Desktop Advanced: Yes