Band Arithmetic function

Overview

The Band Arithmetic function performs an arithmetic operation on the bands of a raster dataset. You can choose predefined algorithms or you can enter your own single-line formula. The operators supported are -,+,/,*, and unary -.

Notes

When using the User Defined method of defining your band arithmetic algorithm, you can enter a single-line algebraic formula to create a single-band output. The supported operators are -,+,/,*, and unary -. To identify the bands, prepend the band number with a B or b. For example:

B1 + B2
b1 + (-b2)
(B1 + B2) / 2(B3 * B5)

When using the predefined indices, enter a space-delimited list indicating the band numbers to be used. The predefined indices are detailed below.

Clg method

The Chlorophyll Index - Green (Clg) is a vegetation index for estimating the chlorophyll content in leaves using the ratio of reflectivity in the near-infrared (NIR) and green bands.

ClRE = [(NIR / Green)-1]

• NIR = pixel values from the near-infrared band
• Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR and green bands in the following order: NIR Green. For example, 7 3.

Reference: Gitelson, A.A., Kaufman, Y.J., Merzlyak, M.N., 1996. "Use of a green channel in remote sensing of global vegetation from EOS-MODIS", Remote Sensing of Environment, Vol. 58, 289–298.

Clre method

The Chlorophyll Index - Red-Edge (Clre) is a vegetation index for estimating the chlorophyll content in leaves using the ratio of reflectivity in the near-infrared (NIR) and red-edge bands.

Clre = [(NIR / RedEdge)-1]

• NIR = pixel values from the near-infrared band
• RedEdge = pixel values from the red-edge band

Using a space-delimited list, you will identify the NIR and red-edge bands in the following order: NIR RedEdge. For example, 7 6.

References:

• Gitelson, A.A., Merzlyak, M.N., 1994. "Quantitative estimation of chlorophyll using reflectance spectra", Journal of Photochemistry and Photobiology B 22, 247–252.

GEMI method

The Global Environmental Monitoring Index (GEMI) is a nonlinear vegetation index for global environmental monitoring from satellite imagery. It's similar to NDVI, but it's less sensitive to atmospheric affects. It is affected by bare soil; therefore, it's not recommended for use in areas of sparse or moderately dense vegetation.

GEMI = eta*(1-0.25*eta)-((Red-0.125)/(1-Red))

where,

eta = (2*(NIR2-Red2)+1.5*NIR+0.5*Red)/(NIR+Red+0.5)

• NIR = pixel values from the near infrared band
• Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

This index outputs values between 0 and 1.

Reference: Pinty, B. and Verstraete, M. M. 1992, "GEMI: a non-linear index to monitor global vegetation from satellites," Plant Ecology, Vol. 101, 15–20.

GNDVI method

The Green Normalized Difference Vegetation Index (GNDVI) is a vegetation index for estimating photo synthetic activity and is a commonly used vegetation index to determine water and nitrogen uptake into the plant canopy.

GNDVI = (NIR-Green)/(NIR+Green)

• NIR = pixel values from the near-infrared band
• Green = pixel values from the green band

Using a space-delimited list, you will identify the near infrared and green bands in the following order: NIR Green. For example, 5 3.

This index outputs values between -1.0 and 1.0.

Reference: Buschmann, C., and E. Nagel. 1993. In vivo spectroscopy and internal optics of leaves as basis for remote sensing of vegetation. International Journal of Remote Sensing, Vol. 14, 711–722.

GVI (Landsat TM) method

The Green Vegetation Index (GVI) was originally designed from Landsat MSS imagery and has been modified for Landsat TM imagery. It's also known as the Landsat TM Tasseled Cap green vegetation index. It could be used with imagery whose bands share the same spectral characteristics.

GVI=-0.2848*Band1-0.2435*Band2-0.5436*Band3+0.7243*Band4+0.0840*Band5-1.1800*Band7

Using a space-delimited list, you will identify the six Landsat TM bands, ordered one through five and six. For example, 1 2 3 4 5 7. If your input contains six bands in the order expected, you don't need to enter a value in the Band Indexes text box.

This index outputs values between -1 and 1.

Reference: Todd, S. W., R. M. Hoffer, and D. G. Milchunas, 1998, "Biomass estimation on grazed and ungrazed rangelands using spectral indices," International Journal of Remote Sensing, Vol. 19, No. 3, 427–438.

Modified SAVI method

The Modified Soil Adjusted Vegetation Index (MSAVI2) tries to minimize the effect of bare soil on the SAVI.

MSAVI2 = (1/2)*(2(NIR+1)-sqrt((2*NIR+1)2-8(NIR-Red)))

• NIR = pixel values from the near infrared band
• Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

Reference: Qi, J. et al., 1994, "A modified soil vegetation adjusted index", Remote Sensing of Environment, Vol. 48, No. 2, 119–126.

MTVI2 method

The Modified Triangular Vegetation Index (MTVI2) is a vegetation index for detecting leaf chlorophyll content at the canopy scale while being relatively insensitive to leaf area index. It uses reflectance in the green, red, and near-infrared (NIR) bands.

MTVI2 = [1.5(1.2(NIR-Green)-2.5(Red-Green))√((2NIR+1)²-(6NIR-5√(Red))-0.5)]

• NIR = pixel values from the near-infrared band
• Red = pixel values from the red band
• Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR, red, and green bands in the following order: NIR Red Green. For example, 7 5 3.

Reference: Haboudane, D., Miller, J.R., Tremblay, N., Zarco-Tejada, P.J., Dextraze, L., 2002. "Integrated narrow-band vegetation indices for prediction of crop chlorophyll content for application to precision agriculture", Remote Sensing of Environment, Vol. 81, 416–426.

NDVI method

The normalized difference vegetation index (NDVI) is a standardized index allowing you to generate an image displaying greenness, also known as relative biomass. This index takes advantage of the contrast of characteristics between two bands from a multispectral raster dataset—the chlorophyll pigment absorption in the red band and the high reflectivity of plant material in the near-infrared (NIR) band.

The documented and default NDVI equation is as follows:

NDVI = ((NIR - Red)/(NIR + Red))

• NIR = pixel values from the near-infrared band
• Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

This index outputs values between -1.0 and 1.0.

Reference: Rouse, J.W., R.H. Haas, J.A. Schell, and D.W. Deering, 1973, "Monitoring vegetation systems in the Great Plains with ERTS," Third ERTS Symposium, NASA SP-351 I:309–317.

Learn more about NDVI

NDVIre method

The Red-Edge NDVI (NDVIre) is a vegetation index for estimating vegetation health using the red-edge band. It is especially useful for estimating crop health in the mid to late stages of growth where the chlorophyll concentration is relatively higher. Also, NDVIre can be used to map the within-field variability of nitrogen foliage to understand the fertilizer requirements of crops.

The NDVIre index is calculated using the NIR and red-edge bands.

NDVIre = (NIR - RedEdge)/(NIR + RedEdge)

• NIR = pixel values from the near-infrared band
• RedEdge = pixel values from the red-edge band

Using a space-delimited list, you will identify the near-infrared and red-edge bands in the following order: NIR RedEdge. For example, 7 6.

This index outputs values between -1.0 and 1.0.

Reference: Gitelson, A.A., Merzlyak, M.N., 1994. "Quantitative estimation of chlorophyll using reflectance spectra," Journal of Photochemistry and Photobiology B 22, 247–252.

PVI method

The Perpendicular Vegetation Index (PVI) is similar to a difference vegetation index; however, it is sensitive to atmospheric variations. When using this method to compare different images, it should only be used on images that have been atmospherically corrected.

PVI = (NIR - a*Red - b) / (sqrt(1 + a2))

• NIR = pixel values from the near-infrared band
• Red = pixel values from the red band
• a = slope of the soil line
• b = gradient of the soil line

Using a space-delimited list, you will identify the NIR and red bands and enter the a and b values in the following order: NIR Red a b. For example, 4 3 0.3 0.5.

This index outputs values between -1.0 and 1.0.

Reference: Richardson, A. J. and C. L. Wiegand, 1977, "Distinguishing vegetation from soil background information", Photogrammetric Engineering and Remote Sensing, 43, 1541–1552.

RTVIcore method

The Red-Edge Triangulated Vegetation Index (RTVICore) is a vegetation index for estimating leaf area index and biomass. This index uses reflectance in the NIR, red-edge, and green spectral bands.

RTVICore = [100(NIR-RedEdge)-10(NIR-Green)]

• NIR = pixel values from the near-infrared band
• RedEdge = pixel values from the red-edge band
• Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR, red-edge, and green bands in the following order: NIR RedEdge Green. For example, 7 6 3.

Reference: Haboudane, D., Miller, J.R., Pattey, E., Zarco-Tejada, P.J., Strachan, I.B., 2004. "Hyperspectral vegetation indices and novel algorithms for predicting green LAI of crop canopies: modeling and validation in the context of precision agriculture", Remote Sensing of Environment, Vol. 90, 337–352.

SAVI method

The Soil-Adjusted Vegetation Index (SAVI) is a vegetation index that attempts to minimize soil brightness influences using a soil-brightness correction factor. This is often used in arid regions where vegetative cover is low.

SAVI = ((NIR - Red) / (NIR + Red + L)) x (1 + L)

NIR and Red refer to the bands associated with those wavelengths. The L value varies depending on the amount of green vegetative cover. Generally, in areas with no green vegetation cover, L=1; in areas of moderate green vegetative cover, L=0.5; and in areas with very high vegetation cover, L=0 (which is equivalent to the NDVI method). This index outputs values between -1.0 and 1.0.

Using a space-delimited list, you will identify the NIR and red bands and enter the L value in the following order: NIR Red L. For example, 4 3 0.5.

Reference: Huete, A. R., 1988, "A soil-adjusted vegetation index (SAVI)," Remote Sensing of Environment, Vol 25, 295–309.

SR method

The Simple Ratio (SR) is a common vegetation index for estimating the amount of vegetation. It is the ratio of light scattered in the NIR and absorbed in red bands, which reduces the effects of atmosphere and topography.

Values are high for vegetation with a large leaf area index, or high canopy closure, and low for soil, water, and nonvegetated features. The range of values is from 0 to about 30, where healthy vegetation generally falls between values of 2 to 8.

SR = NIR / Red

• NIR = pixel values from the near-infrared band
• Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

Reference: Birth, G.S., and G.R. McVey, 1968. "Measuring color of growing turf with a reflectance spectrophotometer," Agronomy Journal Vol. 60, 640-649.

SRre method

The Red-Edge Simple Ratio (SRre) is a vegetation index for estimating the amount of healthy and stressed vegetation. It is the ratio of light scattered in the NIR and red-edge bands, which reduces the effects of atmosphere and topography.

Values are high for vegetation with high canopy closure and healthy vegetation, lower for high canopy closure and stressed vegetation, and low for soil, water, and nonvegetated features. The range of values is from 0 to about 30, where healthy vegetation generally falls between values of 1 to 10.

SRre = NIR / RedEdge

• NIR = pixel values from the near-infrared band
• RedEdge = pixel values from the red-edge band

Using a space-delimited list, you will identify the NIR and red-edge bands in the following order: NIR RedEdge. For example, 7 6.

Reference: Anatoly A. Gitelson, Yoram J. Kaufman, Robert Stark, and Don Rundquist, 2002, "Novel algorithms for remote estimation of vegetation fraction," Remote Sensing of Environment, Vol. 80, 76–87.

Sultan's Formula method

The Sultans process takes a six-band 8-bit image and uses the Sultan's formula to produce a three-band 8-bit image. The resulting image highlights rock formations called ophiolites on coastlines. This formula was designed based on the TM or ETM bands of a Landsat 5 or 7 scene. The equations applied to create each output band is as follows:

Band 1 = (Band5 / Band7) x 100
Band 2 = (Band5 / Band1) x 100
Band 3 = (Band3 / Band4) x (Band5 / Band4) x 100

Using a space-delimited list, you will identify the indexes of the five bands required. For example, 1 3 4 5 6. If your input contains 6 bands in the order expected, you do not need to enter a value in the Band Indexes text box.

Reference: Sultan, M., Arvidson, R.E, Sturchio, N.C. & Guiness, E.A. 1987, "Lithologic mapping in Arid Regions with Landsat thematic mapper data: Meatig Dome, Egypt". Geological Society of America Bulletin 99: 748-762

Transformed SAVI method

The Transformed Soil Adjusted Vegetation Index (TSAVI) is a vegetation index that attempts to minimize soil brightness influences by assuming the soil line has an arbitrary slope and intercept.

TSAVI=(s(NIR-s*Red-a))/(a*NIR+Red-a*s+X*(1+s2))

• NIR = pixel values from the near-infrared band
• R = pixel values from the red band
• s = the soil line slope
• a = the soil line intercept
• X = an adjustment factor that is set to minimize soil noise

Using a space-delimited list, you will identify the NIR and red bands and enter the s, a, and X values in the following order: NIR Red s a X. For example, 3 1 0.33 0.50 1.50.

Reference: Baret, F. and G. Guyot, 1991, "Potentials and limits of vegetation indices for LAI and APAR assessment," Remote Sensing of Environment, Vol. 35, 161–173.

VARI method

The Visible Atmospherically Resistant Index (VARI) is a vegetation index for estimating vegetation fraction quantitatively with only the visible range of the spectrum.

VARI = (Green - Red) / (Green + Red – Blue)

• Red = pixel values from the red band
• Green = pixel values from the green band
• Blue = pixel values from the blue band

Using a space-delimited list, you will identify the red, green, and blue bands in the following order: Red Green Blue. For example, 3 2 1.

Reference: Anatoly A. Gitelson, Yoram J. Kaufman, Robert Stark, and Don Rundquist, 2002, "Novel algorithms for remote estimation of vegetation fraction," Remote Sensing of Environment, Vol. 80, 76–87.

Parameters

Parameter	Description
Input Raster	The input raster.
Method	The type of band arithmetic algorithm you want to deploy. You can define your custom algorithm, or choose a predefined index. User Defined—Allows you to define your custom band arithmetic expression. NDVI—Normalized Difference Vegetation Index SAVI—Soil Adjusted Vegetation Index Transformed SAVI—Transformed Soil Adjusted Vegetation Index Modified SAVI—Modified Soil Adjusted Vegetation Index GEMI—Global Environmental Monitoring Index PVI—Perpendicular Vegetation Index GVI (Landsat TM)—Green Vegetation Index Landsat TM Sultan's Formula—Sultan's Formula VARI—Visible Atmospherically Resistant Index GNDVI—Green Normalized Difference Vegetation Index SR—Simple Ratio NDVIre—Red-Edge Normalized Difference Vegetation Index SRre—Simple Ratio MTVI2—Modified Triangulated Vegetation Index (second iteration) RTVICore—Red Edge Triangulated Vegetation Index Clre—Chlorophyll Index - Red Edge Clg—Chlorophyll Index - Green NDWI—Normalized Difference Water Index EVI—Enhanced Vegetation Index Iron Oxide—Iron Oxide Ratio Ferrous Minerals—Ferrous Minerals Ratio Clay Minerals—Clay Minerals Ratio
Band Indexes	Define your band arithmetic formula if you chose User Defined for your Method. If you chose a predefined index for your Method, define the proper bands of your input raster dataset that correspond to the index.