Cameras table schema

This is a description of the cameras table of the frame camera raster type with a list of supported fields. A frame camera refers to a single perspective imaging camera with an optical lens that can be modeled as a pinhole. The frame camera raster type allows you to manage frame camera imagery in a mosaic dataset.

Cameras table

To use frame camera imagery in a mosaic dataset, you must provide detailed camera parameters and frame information that define a mathematical relationship between the image coordinate system, camera coordinate system, and ground coordinate system.

The following diagram shows how pixels are transformed between the coordinate systems:

The cameras table contains parameters that are unique to each camera, such as focal length, principal point of autocollimation, X and Y coordinates, and affine transformation coefficients. These parameters define the interior orientation of the camera. The table format can be a geodatabase table, a feature class table, a raster catalog, or a .csv file.

Cameras table fields

The supported cameras table fields are listed below. Note that a parameter definition that is duplicated in the frames table will take precedence over the definition in the cameras table.

Note:

If any of the affine transformation parameters A0, A1, A2, B0, B1, and B2 are not provided in the cameras table, they will be computed either from PixelSize or with FilmFiducials using the image size information. If PixelSize is not provided, it will be calculated from NRows and NColumns. At least one of these three parameter groups must be present in the table for successful computation.

Note:

For information about the frames table schema in ArcGIS Desktop 10.6 and earlier, see the supplemental help documentation.

Fields supported in the cameras table

Field name	Field type	Data type	Description	Domain
CameraID	Required	String	The primary key identifying the camera parameters.
FocalLength	Required	Numeric	The focal length of the camera lens, measured in microns.
PrincipalX	Optional	Numeric	The x-coordinate of the principal point of the autocollimation, measured in microns. If not defined, the default is 0. The principal point is the offset between the fiducial center and the principal point of autocollimation (PPA). The principal point of symmetry (PPS) is assumed to be the same as the PPA.
PrincipalY	Optional	Numeric	The y-coordinate of the principal point of the autocollimation, measured in microns. If not defined, the default is 0. The principal point is the offset between the fiducial center and the PPA. The PPS is assumed to be the same as the PPA.
BlockName	Optional	String	The name of the block (project) where the image belongs.
NRows	Optional	Numeric	The number of rows of pixels in the image.
NColumns	Optional	Numeric	The number of columns of pixels in the image.
NBands	Optional	Numeric	The number of bands of pixels in the image.
PixelType	Optional	Numeric or String	The pixel type for the image, either as a numeric value matching an rstPixelType or a matching string.	Numeric value matching an rstPixelType: PT_U1=0, PT_U2=1, PT_U4=2, PT_UCHAR=3, PT_CHAR=4, PT_USHORT=5, PT_SHORT=6, PT_ULONG=7, PT_LONG=8, PT_FLOAT=9, PT_DOUBLE=10, PT_COMPLEX=11, PT_DCOMPLEX=12, PT_CSHORT=12, PT_CLONG=14.
				Matching string: 8_BIT_UNSIGNED, 8_BIT_SIGNED, 16_BIT_UNSIGNED, 16_BIT_SIGNED, 32_BIT_UNSIGNED, 32_BIT_SIGNED, 32_BIT_FLOAT, 1_BIT, 2_BIT, 4_BIT, 64_BIT.
PixelSize	Optional	Numeric	The sensor pixel size.	Unit is micron.
SRS	Optional	String	The coordinate system associated with the perspective point as a file path or WKID (EPSG code). For EPSG code, the coordinate system for x,y and z are separated by a semicolon (;), for example 26918;5773. If not defined, it defaults to the user-specified coordinate system or the coordinate system defined in the mosaic data spatial reference. The spatial reference can be defined for each image item in the mosaic dataset as well. If the SRS parameter is defined in both the cameras table and the frames table, the value in the frames table will take precedence.
AffineDirection	Optional	String	Specifies the direction of the IO affine transformation. If not specified, a default direction of image-to-film (+1) is assumed.	+1: image-to-film.
				-1: film-to-image.
OrientationType	Optional	String	Specifies how the rotational Exterior Orientation (EO) parameters are described. The default is OPK.	OPK—Indicates that the rotational EO parameters are defined as angles in the Omega, Phi, Kappa, Angle Direction, and Polarity fields.
				Matrix—Indicates that the rotational EO parameters are defined as a matrix of nine coefficients in the Matrix field.
AverageZ	Optional	Numeric	The average ground height. The default is the value specified in the raster type's orthorectification properties, or zero if it's not specified.
ApplyECC	Optional	Boolean	Indicates whether to account for the curvature of the earth when applying transformations with respect to ground coordinates. The default is FALSE.	True—Accounts for the curvature of the earth when applying the transformations with respect to ground coordinates.
				False—Assumes the earth is flat.
EarthRadius	Optional	Numeric	An alternative value to use for the curvature of the earth adjustment. The default value is 6378137.0 meters.	Units are meters.
AngleDirection	Optional	String	Specifies the direction of the EO angles. The default value is -1.	-1: Indicates that the EO angles are specified in the clockwise direction.
				+1: Indicates that the EO angles are specified in the counterclockwise direction.
Polarity	Optional	Numeric	Indicates whether the image plane is presumed to be on the same or the opposite side of the perspective center as the object or ground plane. The default is-1, which is the opposite side.	-1: Indicates the opposite side of the image-plane.
				+1: Indicates the same side of the image-plane.
DistortionType	Optional	String	Specifies how the lens distortion is described. The default is DistortionModel.	The default is Distortion Model.
				Distortion Model—Indicates that the distortion correction is described by the coefficients defined in the Radial and Tangential fields.
				Distortion Table—Indicates that distortion is defined as a set of (r,v) pairs indicating radial distance and corresponding distortion value. The RadialDistances and RadialDistortions. fields must be populated.
Radial	For Distortion Type = DistortionModel	String	Specifies the set of four space- or semicolon-delimited coefficients describing radial distortion, for example, 0;0;0;0 for K0;K1;K2;K3.
Tangential	For Distortion Type = DistortionModel	String	Specifies the set of two space- or semicolon-delimited tangential distortion coefficients, for example, 0;0 for P1;P2.
RadialDistances	Optional	String	The space- or semicolon-delimited radial distances are indicated as an ordered set of N values <r[i]>. Each r[i] distance value has a corresponding d[i] distortion value in the RadialDistortions field.
RadialDistortions	Optional	String	The space- or semicolon-delimited distortion values are indicated as an ordered set of N values <d[i]>. Each d[i] distortion value corresponds to the distance value r[i] in the RadialDistance field.
FilmFiducials	Optional	Numeric	Stores film fiducial coordinates.	The format is value pairs separated by semicolons, for example, "106000.0 -106000.0;-106000.0 -106000.0;-106000.0 106000.0;106000.0 106000.0".
A0	Optional	Numeric	The coefficient of the affine transformation that establishes a relationship between image space and film space. The direction of this transformation is indicated using the AffineDirection field. If that field does not exist, the default is image space to film space. The units for this are microns. A0 represents the translation in x direction.
A1	Optional	Numeric	The coefficient of the affine transformation that establishes a relationship between image space and film space. The direction of this transformation is indicated using the AffineDirection field. If that field does not exist, the default is image space to film space. The units for this are microns. A1 represents the change of scale in x direction.
A2	Optional	Numeric	The coefficient of the affine transformation that establishes a relationship between image space and film space. The direction of this transformation is indicated using the AffineDirection field. If that field does not exist, the default is image space to film space. The units for this are microns. A2 represents the skewing of the x direction.
B0	Optional	Numeric	The coefficient of the affine transformation that establishes a relationship between image space and film space. The direction of this transformation is indicated using the AffineDirection field. If that field does not exist, the default is image space to film space. The units for this are microns. B0 represents the translation in y direction.
B1	Optional	Numeric	The coefficient of the affine transformation that establishes a relationship between image space and film space. The direction of this transformation is indicated using the AffineDirection field. If that field does not exist, the default is image space to film space. The units for this are microns. B1 represents the change of scale in y direction.
B2	Optional	Numeric	The coefficient of the affine transformation that establishes a relationship between image space and film space. The direction of this transformation is indicated using the AffineDirection field. If that field does not exist, the default is image space to film space. The units for this are microns. B2 represents the skewing of the x direction.

Note:

Cameras table example

A sample cameras table stored as a geodatabase table is shown below. This table references the possible fields above. The sample contains one row, since only one camera was used.

Sample cameras table

OBJECTID	CAMERAID	FOCALLENGTH	PRINCIPALX	PRINCIPALY	A0	A1	A2	B0	B1	B2	SRS
1	[0]	55173.140478	-476.641812	-14.823294	-18529.301232	6.598754	0	12352.867488	0	-6.598754	3261