Extent

Resumen

An extent is a rectangle specified by providing the coordinate of the lower left corner and the coordinate of the upper right corner in map units.

Debate

Nota:

When used as input to Extensión ArcGIS Spatial Analyst tools, Create Constant Raster, Create Normal Raster, Create Random Raster, Extract By Rectangle and Topo To Raster only the XMin, YMin, XMax and YMax values are used by these tools.

Sintaxis

 Extent  ({XMin}, {YMin}, {XMax}, {YMax}, {ZMin}, {ZMax}, {MMin}, {MMax})

Parámetro	Explicación	Tipo de datos
XMin	The extent XMin value.	Double
YMin	The extent YMin value.	Double
XMax	The extent XMax value.	Double
YMax	The extent YMax value.	Double
ZMin	The extent ZMin value. None if no Z value.	Double
ZMax	The extent ZMax value. None if no Z value.	Double
MMin	The extent MMin value. None if no M value.	Double
MMax	The extent MMax value. None if no M value.	Double

Propiedades

Propiedad	Explicación	Tipo de datos
JSON (Sólo lectura)	Returns a JSON representation of the extent as a string. Sugerencia: The returned string can be converted to a dictionary using the Python json.loads function.	String
MMax (Sólo lectura)	The extent MMax value. None if no M value.	Double
MMin (Sólo lectura)	The extent MMin value. None if no M value.	Double
XMax (Sólo lectura)	The extent XMax value.	Double
XMin (Sólo lectura)	The extent XMin value.	Double
YMax (Sólo lectura)	The extent YMax value.	Double
YMin (Sólo lectura)	The extent YMin value.	Double
ZMax (Sólo lectura)	The extent ZMax value. None if no Z value.	Double
ZMin (Sólo lectura)	The extent ZMin value. None if no Z value.	Double
depth (Sólo lectura)	The extent depth value. None if no depth.	Double
height (Sólo lectura)	The extent height value.	Double
lowerLeft (Sólo lectura)	The lower left property: A point object is returned.	Point
lowerRight (Sólo lectura)	The lower right property: A point object is returned.	Point
polygon (Sólo lectura)	Return the extent as a polygon object.	Polygon
spatialReference (Sólo lectura)	The spatial reference of the extent.	SpatialReference
upperLeft (Sólo lectura)	The upper left property: A point object is returned.	Point
upperRight (Sólo lectura)	The upper right property: A point object is returned	Point
width (Sólo lectura)	The extent width value.	Double

Vista general del método

Método	Explicación
contains (second_geometry, {relation})	Indicates if the base geometry contains the comparison geometry. contains is the opposite of within. Only True relationships are shown in this illustration.
crosses (second_geometry)	Indicates if the two geometries intersect in a geometry of a lesser shape type. Two polylines cross if they share only points in common, at least one of which is not an endpoint. A polyline and an polygon cross if they share a polyline or a point (for vertical line) in common on the interior of the polygon which is not equivalent to the entire polyline. Only True relationships are shown in this illustration.
disjoint (second_geometry)	Indicates if the base and comparison geometries share no points in common. Two geometries intersect if disjoint returns False. Only True relationships are shown in this illustration.
equals (second_geometry)	Indicates if the base and comparison geometries are of the same shape type and define the same set of points in the plane. This is a 2D comparison only; M and Z values are ignored. Only True relationships are shown in this illustration.
overlaps (second_geometry)	Indicates if the intersection of the two geometries has the same shape type as one of the input geometries and is not equivalent to either of the input geometries. Only True relationships are shown in this illustration.
projectAs (spatial_reference, {transformation_name})	Projects a geometry and optionally applies a geotransformation. To project, the geometry needs to have a spatial reference, and not have an UnknownCoordinateSystem. The new spatial reference system passed to the method defines the output coordinate system. If either spatial reference is unknown the coordinates will not be changed. The Z- and measure values are not changed by the ProjectAs method.
touches (second_geometry)	Indicates if the boundaries of the geometries intersect. Two geometries touch when the intersection of the geometries is not empty, but the intersection of their interiors is empty. For example, a point touches a polyline only if the point is coincident with one of the polyline end points. Only True relationships are shown in this illustration.
within (second_geometry, {relation})	Indicates if the base geometry is within the comparison geometry. within is the opposite operator of contains. Only True relationships are shown in this illustration. The base geometry is within the comparison geometry if the base geometry is the intersection of the geometries and the intersection of their interiors is not empty. within is a Clementini operator, except in the case of an empty base geometry.

Métodos

contains (second_geometry, {relation})

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object
relation	The spatial relationship type. BOUNDARY — Relationship has no restrictions for interiors or boundaries. CLEMENTINI — Interiors of geometries must intersect. Specifying CLEMENTINI is equivalent to specifying None. This is the default. PROPER — Boundaries of geometries must not intersect. (El valor predeterminado es None)	String

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates this geometry contains the second geometry.

crosses (second_geometry)

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates the two geometries intersect in a geometry of a lesser shape type.

disjoint (second_geometry)

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates that the two geometries share no points in common.

equals (second_geometry)

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates that the two geometries are of the same shape type and define the same set of points in the plane.

overlaps (second_geometry)

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates the intersection of the two geometries has the same dimension as one of the input geometries.

projectAs (spatial_reference, {transformation_name})

Parámetro	Explicación	Tipo de datos
spatial_reference	The new spatial reference. This can be a SpatialReference object or the coordinate system name.	SpatialReference
transformation_name	The geotransformation name.	String

Valor de retorno

Tipo de datos	Explicación
Object	The projected geometry.

touches (second_geometry)

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates the boundaries of the geometries intersect.

within (second_geometry, {relation})

Parámetro	Explicación	Tipo de datos
second_geometry	A second geometry.	Object
relation	The spatial relationship type. BOUNDARY — Relationship has no restrictions for interiors or boundaries. CLEMENTINI — Interiors of geometries must intersect. Specifying CLEMENTINI is equivalent to specifying None. This is the default. PROPER — Boundaries of geometries must not intersect. (El valor predeterminado es None)	String

Valor de retorno

Tipo de datos	Explicación
Boolean	A return Boolean value of True indicates this geometry is contained within the second geometry.

Muestra de código

Extent example

Display extent object properties for features.

import arcpy

feature_class = "c:/Data/Florida.gdb/airports"

# Fetch each feature from the cursor and examine the extent properties
for row in arcpy.da.SearchCursor(feature_class, ["SHAPE@", "CNTY_NAME"]):
    extent = row[0].extent
    print("Extent of county {0}:".format(row[1]))
    print("XMin: {0}, YMin: {1}".format(extent.XMin, extent.YMin))
    print("XMax: {0}, YMax: {1}".format(extent.XMax, extent.YMax))