Evaluating feature extents

Data Reviewer のライセンスで利用可能。

The extent of a feature is also known as its envelope. It is defined as a minimum bounding rectangle with a width (x-value) and height (y-value). The Evaluate Extent check returns features with minimum bounding rectangles that are within specified parameters. For example, you can check for building area polygons that have a minimum bounding rectangle with a width (x-value) of less than 25 meters and height (y-value) of less than 25 meters.

The check can be run on an entire feature class, a subtype, or a set of features selected using a SQL query.

Once you have defined the criteria for the check, you can configure the notes and a severity rating. The notes allow you to provide a more specific description for the feature that has been written to the Reviewer table and are copied to the Notes field in the Reviewer table. The severity rating allows you to indicate how important the results from a check are in terms of your quality assurance/quality-control processes. The lower the number, the greater the priority the check's results have.

1. Start ArcMap.
2. On the main menu, click Customize > Toolbars > Data Reviewer.
3. Click the Select Data Check drop-down arrow on the Data Reviewer toolbar, click the plus sign (+) next to Spatial Parameter Evaluation Checks, then click Evaluate Extent Check.

   The Evaluate Extent Check Properties dialog box appears.

   

4. If necessary, type a unique name for the check in the Check Title text box.

   注意:

   The check title can be used to describe the conditions you are looking for with the check. This is useful when you have multiple instances of the same check to validate the same feature classes or tables but with different validation parameters.

5. Click the Feature Class/Subtype drop-down arrow to choose the feature class and subtype on which to run the check.
6. To run the check on the entire feature class and save this setting, check the Always Run on Full Database check box.
7. To run the check on specific features in a feature class, click SQL to construct an SQL query.
8. Click the Units drop-down arrow and choose the unit of measurement being used for the extent.
9. Click the Operation drop-down arrow in the X area and choose an operation to use for the extent's width.
   • Less than—The polygon feature's x-value is less than the number of units specified. For example, if the value is 10, polygons with x-values of 9 through 0 are returned as results.
   • Less than or equal—The polygon feature's x-value is equal to or less than the number of units specified. For example, if the value is 10, polygons with x-values of 10 through 0 are returned as results.
   • Greater than—The polygon feature's x-value is greater than the number of units specified. For example, if the value is 10, polygons with an x-value of 11 or more are returned as results.
   • Greater than or equal—The polygon feature's x-value is equal to or greater than the number of units specified. For example, if the value is 12, polygons with an x-value of 12 or more are returned as results.
   • Not equal to—The polygon feature's x-value is not equal to the number of units specified. For example, if the value is 10, polygons with an x-value of 8, 12, or any other value that is not equal to 10 are returned as results.
   • Equal to—The polygon feature's x-value is equal to the number of units specified. For example, if the value is 10, lines with an x-value of 10 are returned as results.
   • In Between - Including Bounds—The polygon feature's x-value is between or equal to one of the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with x-values of 1 through 10 are returned as results.
   • In Between - Not Including Bounds—The polygon feature's x-value is between the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with x-values of 2 through 9 are returned as results.
   • Not (In Between - Including Bounds)—The polygon feature's x-value is not equal to or between the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with x-values of less than 1 (0.9 through 0.1) or 11 or greater are returned as results.
   • Not (In Between - Not Including Bounds)—The polygon feature's x-value is equal to or not between the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with x-values of 1 or less or 10 or greater are returned as results.

   The operation text box appears. If you choose an operation with bounding values, Lower Bound and Upper Bound text boxes appear.

10. Type the number of units to use with the operation.

    If you choose an operation with bounding values, you must indicate two values: one each for the minimum and maximum ranges of the tolerance.

11. Click the Operation drop-down arrow in the Y area and choose an operation to use for the extent's height.
    • Less than—The polygon feature's y-value is less than the number of units specified. For example, if the value is 10, polygons with y-values of 9 through 0 are returned as results.
    • Less than or equal—The polygon feature's y-value is equal to or less than the number of units specified. For example, if the value is 10, polygons with y-values of 10 through 0 are returned as results.
    • Greater than—The polygon feature's y-value is greater than the number of units specified. For example, if the value is 10, polygons with a y-value of 11 or more are returned as results.
    • Greater than or equal—The polygon feature's y-value is equal to or greater than the number of units specified. For example, if the value is 12, polygons with a y-value of 12 or more are returned as results.
    • Not equal to—The polygon feature's y-value is not equal to the number of units specified. For example, if the value is 10, polygons with a y-value of 8, 12, or any other value that is not equal to 10 are returned as results.
    • Equal to—The polygon feature's y-value is equal to the number of units specified. For example, if the value is 10, polygons with a y-value of 10 are returned as results.
    • In Between - Including Bounds—The polygon feature's y-value is between or equal to one of the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with y-values of 1 through 10 are returned as results.
    • In Between - Not Including Bounds—The polygon feature's y-value is between the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with y-values of 2 through 9 are returned as results.
    • Not (In Between - Including Bounds)—The polygon feature's y-value is not equal to or between the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with y-values of less than 1 (0.9 through 0.1) or 11 or greater are returned as results.
    • Not (In Between - Not Including Bounds)—The polygon feature's y-value is equal to or not between the number of units specified in the Lower Bound (minimum) and Upper Bound (maximum) text boxes. For example, if the lower bound is 1 and the upper bound is 10, polygons with y-values of 1 or less or 10 or greater are returned as results.

    The operation text box appears. If you choose an operation with bounding values, Lower Bound and Upper Bound text boxes appear.

12. Type the number of units to use with the operation.

    If you choose an operation with bounding values, you must indicate two values: one each for the minimum and maximum ranges of the tolerance.

13. If necessary, type descriptive text for the check results in the Notes text box in the Reviewer Remarks area.
14. If necessary, click the Severity drop-down arrow and choose a value that indicates the priority of the check's results in the Reviewer Remarks area.

    The severity indicates the importance of the check result. The values range from 1 to 5, with 1 being the highest priority and 5 being the lowest.

15. [OK] をクリックします。
16. Click the Run Data Check button on the Data Reviewer toolbar.

    The Features to Validate dialog box appears.

    

17. Choose an option in the Features to Validate area.
    • Selection Set—The check is run on the features that are currently selected in the map.
    • Current Extent—The check is run on the current map extent, which is controlled by the map scale.
    • Definition Query—The check is run on the features that are displayed based on definition queries that have been created for the feature class.
    • Full Database—The check is run on all the features in the feature class.
18. To run the check only on features that have been edited in a versioned workspace, check the Changed Features Only check box.

    注意:

    The Changed Features Only option is available only for a versioned database.

19. Click OK.

    The check is run on the extent specified on the Features to Validate dialog box.

    When the check finishes, a check results dialog box appears.

20. Do one of the following:
    • If you want to browse the results in the Browse Features window, choose the Browse Results option.
    • If you have started a Reviewer session and want to record the results in the Reviewer table, choose the Write to Reviewer Table option.
21. [OK] をクリックします。