Removing separation settings

Production Mapping ライセンスで利用できます。

Separations are an advanced print production feature and may not be needed to be set at all times before the PDF file is given to the offset printing hardware/software. Separation settings can be removed from an existing setting file using the Separation Settings dialog box.

1. Start ArcMap.
2. Load data in the map if necessary.
3. On the main menu, click File > Load Production PDF Settings.

   The Open dialog box appears.

4. Browse to a Production PDF .xml file.
5. Click Open.

   The .xml file is loaded into the Production PDF environment and the Export Map dialog box appears.

   メモ:

   The Export Map dialog box appears automatically with the Production PDF type selected. After closing the dialog box by clicking either Save or Cancel, the previous exporter type is restored.

6. Click the Production tab.
7. Click Map Colors.

   The Color Mapping Rules dialog box appears.

8. Click Separation Settings.

   The Separation Settings dialog box appears.

   

9. Uncheck the Enable separation settings check box to remove the settings.
10. Click OK on the Separation Settings dialog box.
11. Click OK on the Color Mapping Rules dialog box.
12. Click Save Settings.