This lesson will cover how to create a corridor, the third cost-distance analysis workflow. In lessons 2 you covered the cost-distance analysis workflow for connecting regions with the optimum network and in lesson 3, you walked through the workflow for connecting two specified regions with the least-cost path. Like the least-cost path created in lesson 3, a corridor connects two regions, but unlike the least-cost path, the corridor is wider than one cell. As you will see, a corridor is not just a buffered least-cost path. These wider corridors are particularly useful for connecting your wildlife patches in your bobcat conservation plan.
Creating a corridor is a four step process:
- Calculate the cost distance from region 1.
- Calculate the cost distance from region 2.
- Use the Corridor tool to combine the two cost distance surfaces calculated above.
- Set a accumulative-cost threshold to define the corridor.
This lesson is divided into four sections:
- Opening and editing the ModelBuilder model
- Using the Cost Distance tool to calculate cost distance rasters
- Using the Corridor tool to add cost distance rasters
- Using the Extract by Attributes tool to delineate the final corridor
ArcGIS Spatial Analyst is required for this analysis and you must ensure that it is enabled. See Enabling the Spatial Analyst extension.
This lesson continues on the data that you downloaded in lesson 1. If you have not downloaded the data, see the first section in Lesson 1: Creating a cost surface.
Opening and editing the ModelBuilder model
- Open the Corridor map document in the CostDistanceAnalysis folder by double-clicking the file.
- Three layers are visible on the map: Source, Destination, and CostSurface. Explore the CostSurface layer by clicking it with the Identify tool
(found on the Tools toolbar). A cost surface represents how costly, or taxing it is, to travel across each map unit. Notice that areas in red are more costly than areas in green.
- To help keep the corridor workflow organized, the tools used will be tracked in a ModelBuilder model. Within the CostDistanceAnalysis folder is a folder named Toolboxes, with a toolbox named CostDistanceAnalysisToolbox.tbx, which contains several models. One of these models will be used to create a corridor for this lesson. Open ArcCatalog by clicking the ArcCatalog icon
in the taskbar, which will open the Окно Каталог (Catalog). From the Окно Каталог (Catalog), open the Corridor model by right-clicking the model and clicking Edit.
Using the Cost Distance tool to calculate cost distance rasters
A corridor connects two regions, represented in this lesson by the Source and Destination layers. In contrast to least-cost paths, which differentiate between the source and destination regions, the Corridor tool only requires two regions to be present. This lesson will use the Source and Destination layers as the two input regions to allow for comparison with the least-cost path created in lesson 3.
- Drag the Source and Destination layers from the table of contents into the Corridor model.
- Not only are two regions required, so is a cost surface. Corridors are calculated by measuring the accumulation of cost from traveling to and from the two regions, based on the values in the cost surface. Drag the CostSurface layer from the table of contents into the Corridor model, and place it between the Source and Destination layers.
- To calculate accumulative cost from a region, use the Cost Distance tool. This tool requires the Spatial Analyst extension, so turn on the extension by first clicking the Customize tab in the ArcMap taskbar. Choose the Extensions option from the drop-down list, and check the Spatial Analyst check box to turn it on.
- Once the extension is turned on, access is granted to the Spatial Analyst tools. Open the ArcMap toolboxes by clicking the ArcToolbox button
in the Standard toolbar. Browse to the Cost Distance tool in the Distance toolset in the Spatial Analyst Tools toolbox.
- Drag the Cost Distance tool into the Corridor model and place it to the right of the Source and CostSurface layers.
- Using the Connect tool
in the Corridor ModelBuilder model taskbar, connect the Source layer to the Cost Distance tool. Make the connection by clicking the Source layer first, and then click the Cost Distance tool. Choose the Input raster or feature source data option.
- While the Connect tool is still turned on, connect the CostSurface layer to the Cost Distance tool. Select the Input cost raster option.
- Double-click the Cost Distance tool to open the tool's dialog box. Type CostDistance_1 in the Output distance raster parameter to name the output distance raster. The model automatically saves the file into the Output.gdb geodatabase file. To summarize the input and output layers for the Cost Distance tool, specify the parameters as follows:
- Input raster or feature source data: Source
- Input cost raster: CostSurface
- Output distance raster: CostDistance_1
- Click OK to close the Cost Distance tool's dialog box.
- Once the dialog box is closed, right-click the Cost Distance tool and click Run to execute the tool.
- Add the CostDistance_1 output layer to the map document by right-clicking the green CostDistance_1 layer in the model and clicking Add To Display.
- Explore the CostDistance_1 layer within the Corridor map document. According to the legend, locations that can be reached at low costs from the source are in lighter colors. In contrast, locations farther from the source are more costly to reach, which is indicated by darker colors.
- At this point in the workflow, the accumulation of cost from the first region has been calculated. Recall that a corridor measures the accumulation of cost from both regions. The next step is to repeat the above procedure for the second region. Navigate again to the Cost Distance tool in the ArcToolbox.
- Drag the Cost Distance tool into the Corridor model and place it to the right of the Destination and CostSurface layers.
- Organize the variables within the Corridor model by clicking the Select Elements tool
. Drag the Output backlink variable from the first Cost Distance tool above the CostDistance_1 layer. Then use the Select Elements tool to draw a rectangle around the second Cost Distance tool and its output variables. Once they are highlighted, reposition the second Cost Distance tool to the right of the CostSurface and Destination layers.
- Using the Connect tool in the Corridor model, connect the Destination layer to the second Cost Distance tool. Make the connection by clicking the Destination layer first, and then click the Cost Distance tool. Choose the Input raster or feature source data option.
- Recall that the Cost Distance tool also requires a cost raster. Using the Connect tool in the Corridor model, connect the CostSurface layer to the second Cost Distance tool.
- Double-click on the second Cost Distance tool to open the tool's dialog box. Type CostDistance_2 in the Output distance raster parameter to name the output distance raster. To summarize the input and output layers for the second Cost Distance tool, specify the parameters as follows:
- Input raster or feature source data: Destination
- Input cost raster: CostSurface
- Output distance raster: CostDistance_2
- Click OK to close the Cost Distance tool's dialog box.
- Once the dialog box is closed, right-click the second Cost Distance tool and click Run to execute the tool.
- Add the CostDistance_2 output layer to the map document by right-clicking the green CostDistance_2 layer in the model and clicking Add To Display.
- Explore the CostDistance_2 layer within the Corridor map document. This layer looks very similar to the CostDistance_1 layer, except that the cost accumulates from the second region.
Using the Corridor tool to add cost distance rasters
At this point in the workflow, the accumulated cost from both regions has been calculated. The next step for creating a corridor combines the CostDistance_1 and CostDistance_2 layers into a single layer using the Corridor tool.
- Browse to the Corridor tool in ArcToolbox by clicking the Spatial Analyst Tools toolbox and then the Distance toolset.
- Drag the Corridor tool into the Corridor model, and place it to the right of the CostDistance_1 and CostDistance_2 layers.
- Using the Connect tool in the Corridor model, connect the CostDistance_1 layer to the Corridor tool. Make the connection by clicking the CostDistance_1 layer first, and then click the Corridor tool. Choose the Input cost distance raster 1 option.
- Next, use the Connect tool to add the CostDistance_2 layer to the Corridor tool. Choose the Input cost distance raster 2 option.
- Double-click the Corridor tool within the Corridor model to open the tool's dialog box. Type Corridor in the Output raster parameter to name the resulting corridor raster. To summarize the input and output layers for the Corridor tool, specify the parameters as follows:
- Input cost distance raster 1: CostDistance_1
- Input cost distance raster 2: CostDistance_2
- Output raster: Corridor
- Click OK to close the dialog box and apply the changes you have made to the Corridor tool.
- Once the dialog box is closed, right-click the Corridor tool and click Run to execute the tool.
- Add the Corridor output layer to the map document by right-clicking the green Corridor layer in the model and clicking Add To Display.
- Explore the Corridor layer within the Corridor map document by clicking on various parts of the map with the Identify tool (found in the Tools toolbar). Recall that a corridor measures the accumulative cost to travel between two regions. The Corridor tool is designed to add the cost distances from regions one and two together, thereby calculating the accumulative cost for back-and-forth travel.
Using the Extract by Attributes tool to delineate the final corridor
In order to narrow the Corridor layer into something that resembles an actual corridor, a threshold has to be set for the maximum acceptable accumulative cost within the corridor. This can be done using the Extract by Attribute tool.
- Browse to the Extract by Attributes tool in ArcToolbox by clicking the Spatial Analyst Tools toolbox and then the Extraction toolset.
- Drag the Extract by Attributes tool into the Corridor model, and place it to the right of the Corridor output layer.
- Using the Connect tool in the Corridor model, connect the Corridor output layer to the Extract by Attributes tool. Make the connection by clicking the Corridor layer first, and then click the Extract by Attributes tool. Choose the Input raster option.
- Double-click the Extract by Attributes tool within the Corridor model to open the tool's dialog box. Locate the Where clause parameter. This is where the threshold for maximum acceptable accumulative cost within the corridor is specified. Inside the Where clause parameter, type the following statement: "Value" < 222,000. This threshold value is determined by the accumulative distance values, the mover's preference, and the study area. Type Corridor_Final in the Output raster parameter to name the resulting least-cost path. To summarize the input and output for the Extract by Attributes tool, specify the parameters as follows:
- Input raster: Corridor
- Where clause: "Value" < 222,000
- Output raster: Corridor_Final
- Click OK to close the dialog box and apply the changes made to the Extract by Attributes tool.
- Once the dialog box is closed, right-click the Extract by Attributes tool and click Run to execute the tool.
- Add the Corridor_Final output layer to the map document by right-clicking the green Corridor_Final layer in the model and clicking Add To Display.
- Save the Corridor model by clicking the Save button
in the ModelBuilder taskbar. Close the model once it is saved.
- Turn off the Corridor, CostDistance_2, and CostDistance_1 layers by unchecking their respective check boxes in the table of contents.
- Zoom in on the corridor using the Zoom In tool
tool on the Tools toolbar. Click the Zoom In tool, drag a rectangle in the area between the Source and Destination regions. Since the Corridor_Final layer is displayed above the CostSurface layer, it is easier to see how the cost surface affects the corridor. Notice how the corridor thins as it traverses the high-cost section in red. Also notice that the corridor crosses the area of high cost at its thinnest point, reducing the total accumulative cost of the corridor.
- Explore the Corridor_Final layer by clicking on it with the Identify tool (found on the Tools toolbar). There are no values greater than the maximum acceptable value specified in this lesson, 222,000. Additionally, the accumulative cost values decrease towards the center of the corridor (darker color). At the very center of the corridor is the single route with the lowest accumulative cost, which is the least-cost path.
- Save the map document by clicking the Save button on the Standard toolbar.
At this point, the third cost-distance analysis workflow has been completed, a corridor has been created between two regions. This lesson also made note of the similarities and differences between corridors and least-cost paths from lesson 3. To learn more about least-cost paths, see Lesson 3: Creating a least cost path. To learn more about how a cost surface is created, see Lesson 1: Creating a cost surface.