下方的表格列出了对 Geostatistical Analyst 工具箱中每种工具所做的更改。每个工具对应一张表，您可以单击工具名称导航到工具参考页面。有关上述历史表格内容说明的详细信息，请参阅本主题结尾的部分。
面插值图层到面
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.1 | 此版本的新特性 |
计算 Z 值
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
创建地统计图层
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
创建空间平衡点
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
交叉验证
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
增密采样网络
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.2 | 参数 selection_criteria 添加了一个新选项：QUARTILE_THRESHOLD_UPPER |
10.0 | 此版本的新特性 |
含障碍的扩散插值法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
经验贝叶斯克里金法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 如果输入数据位于地理坐标系中，将使用弦距离来计算距离。 |
10.2.1 | 添加的新参数：semivariogram_model_type |
10.1 | 此版本的新特性 |
提取值到表
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
GA 图层转等值线
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 添加了 3 个新参数：
参数 contour_type 添加了一个新选项：SAME_AS_LAYER 参数 contour_type 的默认值已由 CONTOUR 更改为 SAME_AS_LAYER |
10.2.1 | 已增强，可支持多核处理 |
9.3 | 添加的新参数：contour_quality |
9.2 | 此版本的新特性 |
GA 图层至格网
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.3 | 参数 points_per_block_horz 已由 Required 更改为 Optional 参数 points_per_block_vert 已由 Required 更改为 Optional |
9.2 | 参数 cell_size 已由 Required 更改为 Optional |
9.0 | 此版本的新特性 |
GA 图层至点
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.1 | 添加的新参数：append_all_fields |
9.2 | 此版本的新特性 |
高斯地统计模拟
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 添加的新参数：conditioning_measurement_error_field |
9.3 | 此版本的新特性 |
获取模型参数
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
全局多项式插值法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
反距离权重法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
含障碍的核插值法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 Service Pack 1 | 添加的新参数：output_type |
10.0 | 此版本的新特性 |
局部多项式插值法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
移动窗口克里金法
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
邻域选择
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
径向基函数
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
半变异函数灵敏度
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
设置模型参数
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
9.2 | 此版本的新特性 |
子集要素
| 版本 | 描述 |
|---|---|
10.3 | 已迁移到 ArcGIS Pro 1.0 |
10.0 | 此版本的新特性 |
About the toolbox history tables
At every release, Esri makes changes to existing tools and introduces new tools. These changes provide solutions to problems that were difficult to solve in previous releases and make tools more powerful and easier to use.
As an example of how you might use these history tables, suppose you are helping a colleague who is using version 10.2 while you're using version 10.3. You might suggest to your colleague that they use the Add Geometry Attributes tool to find point centroids of polygon features. The Add Geometry Attributes tool is found in the Data Management toolbox, and checking the Data Management toolbox history topic, you find that Add Geometry Attributes was not introduced until the 10.2.1 release. You can then suggest a 10.2 workflow of using the Feature To Point tool to find polygon centroids.
When changes are made to existing tools, every effort is made to maintain backward compatibility, meaning that the use of a tool in the previous release continues to work in the new release. That is, suppose you have a model or script written in version 10.2 that uses the Buffer tool. At version 10.3, the Buffer tool has a new optional parameter, method, with the default value of PLANAR. Your 10.2 script or model will work in 10.3 because the new method parameter is optional and its default value causes Buffer to work exactly the same way it did in 10.2.
Esri strives to maintain backward compatibility. However, it's not always possible due to the new functionality being introduced. Here are the cases where backward compatibility may break:
- If a parameter was removed, old workflows that used the parameter will no longer work.
- If a parameter option was removed, old workflows that used the option may no longer work. In many cases, the option that was removed is replaced by another option and the tool knows what to do if the previous option was specified.
- If a parameter had a data type removed and your old workflow used inputs of that data type, the old workflow will not work in the new version.
- A license change may affect your workflow. Most license changes are downward (from Advanced to Standard, for example) which would not affect backward compatibility.
- An extension change may affect your workflow. Extension changes that affect existing workflows are rare.
- If a parameter's default value changed, it may affect your workflow. You'll need to examine your existing workflows to determine the effect of the default value change.
- If the order of parameters changed, scripts that use positional arguments may break.
Below is more information about changes cataloged in the history tables.
New at this version
The last row of each table always contains the release version at which the tool was introduced to the toolbox.
Ported / Not ported to ArcGIS Pro
If you're transitioning from ArcMap to ArcGIS Pro, you may need to know whether a tool in ArcMap is also available in ArcGIS Pro. The majority of tools found in version 10.3 were ported over to (that is, replicated and made available in) ArcGIS Pro version 1.0. Information about whether the tool was ported over from ArcMap to the ArcGIS Pro platform is usually contained in the first row of the table. Note that you can use the Analyze Tools For Pro tool to check whether your ArcMap models and scripts will run in ArcGIS Pro.
Parameter options
A parameter option (also referred to as an enumerator) is a string that affects tool execution. For example, the join_attributes parameter of the Intersect tool has three options: ALL, NO_FID, and FID_ONLY. New options appear occasionally from release to release, and options may be removed. An option introduced in a later version (such as 10.4) cannot be used in an earlier version (such as 10.3).
Sometimes you'll see an option removed and replaced with a very similar option, such as Euclidean distance replaced with EUCLIDEAN_DISTANCE. In cases like this, the tool is programmed to accept either option and backward compatibility is not broken.
New and removed parameters
New parameters are almost always added as the last parameter so backward compatibility is maintained in scripts. However, sometimes the new parameter must be inserted between existing parameters and compatibility in scripts may be broken—you may have to edit your script to run in the later version. If a new parameter is inserted between existing parameters, it will be noted as a change in parameter order.
Removed parameters are rare. Scripts that use the removed parameter will have to be changed, but models should continue to run.
Parameter default value changes
Optional parameters have a default value—the value that will be used unless you change it. If there is a change to a parameter's default value, it may affect your existing models and scripts.
Parameter data type changes
A data type defines the permissible values for a parameter, such as the type of datasets (features, tables, networks, and so on). If a data type is removed at a version, it means that the parameter no longer accepts the dataset as input or output. You may have to change your models and scripts if they use the removed data type.
Parameter order
New parameters are almost always added as the last parameter and don't affect the order of existing parameters. In rare cases, the order of existing parameters may change, and scripts that use positional arguments may break. Instead of using positional arguments, you can use keyword arguments as shown below. Models will still execute as they are not dependent on parameter order.
# Positional arguments - skipping optional arguments using empty strings is dependent on
# the order of the optional parameters
#
arcpy.AddField_management("schools", "school_id", "LONG", "", "", "", "", "NON_NULLABLE")
# Keyword arguments - position doesn't matter
#
arcpy.AddField_management("schools", "school_id", "LONG", field_is_nullable="NON_NULLABLE")
Parameter name case
The name of a parameter may change case, for example, from In_Features to in_features. This change only affects scripts that use keyword arguments. In Python, keyword arguments are case sensitive.
Parameter type
A parameter type may change from required to optional or from optional to required. Changing from optional to required may affect existing workflows.
Tool licensing and extension
A licensing or extension change may affect existing workflows.
Deprecated tool
See the topic What is a deprecated tool? for more information.