Edit versioned data in Informix using SQL—ArcMap

Edit the Default version
Edit a named version
Switch from editing a named version back to editing Default
Reconcile and post the edits to the named version

Complexity:: Beginner
Data Requirement:: Use your own data

You can edit versioned data in a geodatabase in IBM Informix in two ways: by editing a named version through a versioned view or editing the Default version through a versioned view. See An overview of editing versioned data using SQL for a description of each editing model.

In most cases, you will use only one editing model. However, it is possible to use both at the same site; therefore, this workflow explains how to use both so you can see how you would transition between the two. If you use only one, read the section specific to the editing model you want to use.

Edit the Default version

You can use SQL to connect to the Default version and edit a versioned view. You do not need to open an edit session. When you start editing, you are automatically connecting to the current state of the Default version.

You should commit after each edit you make to avoid blocking other users from accessing the delta tables of the table or feature class.

In the following steps, a versioned view (blic_evw) is edited. Edits made to this view write to the delta tables of the blic versioned table. Since there are only a couple of edits, you'll perform them in the Default version.

Connect to the database from an SQL client. Be sure to connect as a user with privileges to edit the dataset and versioned view.
Perform the first edit to the versioned view using SQL.
In this example, an existing row is updated to alter the property owner name.
```
UPDATE blic_evw 
SET propowner = 'C. O. Industry' 
WHERE lic = 44977;
```
Commit your edit.
```
COMMIT;
```
Do the next edit.
A new record is added to the table through the versioned view.
```
INSERT INTO blic_evw (propowner, date_entered, location)
VALUES (
  'Moe Esposito', 
  CURRENT DATETIME, 
  sde.ST_PointFromText ('point (0.0125662 0.0046711)', 12));
```
Tip:
In the INSERT statement, no ObjectID value is specified; the versioned view automatically gets the next available ObjectID and inserts it for the row.
Commit your edit.
```
COMMIT;
```

Edit a named version

You are handed a stack of updates for the blic feature class, so you decide it would be a good idea to perform your edits in a named version.

The functions and their syntax that you will use to edit a named version of the geodatabase are as follows:


Function	Purpose	Syntax and description
sde.create_version	Create a named geodatabase version. If you are editing named versions (versions other than Default), always edit your own, separate version; multiple editors cannot edit the same named version using versioned views.	EXECUTE FUNCTION sde.create_version ('<parent_version>', '<child_version>', <name_rule>, <access>, '<description>')
sde.set_current_version	Set which geodatabase version and state you will access. You access the state the version was pointing to when you executed set_current_version.	EXECUTE FUNCTION sde.set_current_version('<child_version>')
sde.edit_version	Start and end an edit session on a named version. Edits in the transaction are committed whenever this function is executed.	EXECUTE FUNCTION sde.edit_version('<child_version>',1) Specify 1 to start the edit session. Specify 2 to end it.

The parameters in the execute statements represent the following:

<parent_version> is the version from which your version is created.
<child_version> is the named version you create for editing.
<name_rule> indicates whether the name specified for the version should be taken as given (2), or a unique name should be created when a duplicate name is specified (1).
<access> is the permission level for the version: either 0 for private, 1 for public, or 2 for protected.
<description> is a text description of the child version.

In the following steps, a named version (myedits12111) is created from Default and edits are made in that version through the blic_evw versioned view.

From a command prompt, create a new version in which to perform your edits.

EXECUTE FUNCTION sde.create_version ('sde.DEFAULT', 'myedits12111', 1, 1, 'versioned view edit version');

Text enclosed in single quotation marks is read literally. Therefore, the text you type inside the quotation marks must match the case of the text (all uppercase, all lowercase, or mixed case) as it is stored in the database.

Set the version for the edit session to the child version you just created.
```
EXECUTE FUNCTION set_current_version('myedits12111');
```
This sets the edit state to the current state of myedits12111.
Start an edit session by executing the edit_version function and specifying 1. The 1 indicates that an edit session should be started.
```
EXECUTE FUNCTION sde.edit_version('myedits12111',1);
```
From an SQL client, start a new transaction to edit blic_evw.

Do a set of edits on the versioned view using SQL.

INSERT INTO blic_evw (propowner, date_entered, location)
VALUES (
  'V. Nay', 
  CURRENT DATETIME, 
  sde.ST_PointFromText ('point (0.0125699 0.0046700)', 12));

UPDATE blic_evw 
SET (phone1,phone2) = ('555.111.2345','555.111.6789') 
WHERE propowner = 'Tella Chomsky';

UPDATE blic_evw
SET exp_date = '2020-06-30 17:00:00'
WHERE lid = 22903;

UPDATE blic_evw
SET location = sde.ST_PointFromText ('point (0.0125705 0.0046688)', 12))
WHERE lid = 8992;

INSERT INTO blic_evw 
(codenum, propowner) 
VALUES (456, 'Anjo Badsu');

DELETE FROM blic_evw
WHERE lid = 133;

Commit your edits.
```
COMMIT;
```

More edits are made in SQL. After the next set of edits is finished, close the edit session.

Stop the edit session by calling the edit_version stored procedure, but this time, specify 2. The 2 indicates the edit session should be ended.
```
EXECUTE FUNCTION sde.edit_version('myedits12111',2);
```
When all editing is done, reconcile and post edits through ArcGIS Desktop, then delete the geodatabase version you created in step 2. Or if you decide you do not want the changes, you can delete the version you created in step 1 without reconciling and posting the edits.
```
EXECUTE FUNCTION sde.delete_version('myedits12111');
```
Tip:
You can only edit one version per edit session. For example, if you want to edit a second version (such as mynewedits), you must close the edit session on myedits12111, as shown in this step. Then you could execute set_current_version to point to the mynewedits version, then start an edit session on it by executing edit_version.

Switch from editing a named version back to editing Default

If you need to go back to editing the Default version directly—for example, if your manager tells you other users at your site need to see a particular edit immediately—you can execute set_default to switch back to editing the Default version. The edit you make to the Default version can be seen by other users connected to Default as soon as they refresh their client connections.

The function and its syntax that you will use to edit the Default version of the geodatabase are as follows:


Function	Purpose	Syntax and description
sde.set_default	Return to editing the current state of the Default version. Execute this function if you were editing a named version or a specific state of the Default version but want to go back to editing the current version of Default.	EXECUTE FUNCTION sde.set_default ( )

At the SQL prompt, execute the set_default function.
```
EXECUTE FUNCTION sde.set_default();
```
The session is now set to edit the current state that the Default version references.

Edit the blic_evw versioned view.

INSERT INTO blic_evw (propowner, b_name, date_entered, location)
VALUES (
  'Ruben Gol', 
  CURRENT DATETIME, 
  'Chez Coiffure',
  sde.ST_PointFromText ('point (0.0125650 0.0046721)', 12));

Commit your edit.
```
COMMIT;
```
Other clients that are pointing to the same state of the Default version or any state in its lineage can refresh their connections and see the new point feature.

Reconcile and post the edits to the named version

When you have finished the edits in the named version, you must use ArcGIS to reconcile, review and resolve conflicts, and post your edits. This can be done in ArcGIS Desktop using the Reconcile Versions geoprocessing tool or a Python script. See the following topics for more information:

Once edits have been posted to the Default version, your named version can be deleted. The function and its syntax that you will use to delete the named version after you reconcile and post to the Default version of the geodatabase are as follows:


Function	Purpose	Syntax and description
sde.delete_version	Delete a geodatabase version.	EXECUTE FUNCTION sde.delete_version('<child_version>')

The following example deletes myedits12111 after all edits have been reconciled and posted to the Default version:

EXECUTE FUNCTION sde.delete_version('myedits12111');