The tables below catalog changes made to every tool in the Cartography toolbox. There is one table per tool and you can click the tool name to navigate to the tool reference page. For more information on interpreting the contents of these history tables, see the section at the end of this topic.
Add Representation
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Aggregate Points
| Version | Description |
|---|---|
10.3 | Ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Aggregate Polygons
| Version | Description |
|---|---|
10.3 | Ported to ArcGIS Pro 1.0 |
10.1 | New parameter added: barrier_features Parameter out_table changed from Derived to Optional Parameter order changed: a parameter was inserted before out_table |
10.0 | New at this version |
Align Marker To Stroke Or Fill
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.2 | New at this version |
Calculate Adjacent Fields
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Calculate Central Meridian And Parallels
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Calculate Geodesic Angle
| Version | Description |
|---|---|
10.0 | Deprecated |
9.2 | New at this version |
Calculate Grid Convergence Angle
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Calculate Line Caps
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Calculate Polygon Main Angle
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.1 | New parameter added: rotation_method |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Calculate Representation Rule
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Calculate UTM Zone
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Collapse Dual Lines To Centerline
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Collapse Road Detail
| Version | Description |
|---|---|
10.7 | New parameter added: locking_field |
10.3 | Not ported to ArcGIS Pro 1.0 |
10.1 | New at this version |
Contour Annotation
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Create Cartographic Partitions
| Version | Description |
|---|---|
10.8 | New parameter added: partition_method |
10.3 | Not ported to ArcGIS Pro 1.0 |
10.1 | New at this version |
Create Overpass
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.2 | New at this version |
Create Underpass
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.2 | New at this version |
Cul-De-Sac Masks
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.0 | New at this version |
Delete Grids And Graticules
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Delineate Built-Up Areas
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.2 | New parameter added: minimum_building_count |
10.1 | New at this version |
Detect Graphic Conflict
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.2 | New at this version |
Disperse Markers
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.3 | New at this version |
Drop Representation
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Feature Outline Masks
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.0 | New at this version |
Grid Index Features
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Intersecting Layers Masks
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.0 | New at this version |
Make Grids And Graticules Layer
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Map Server Cache Tiling Scheme To Polygons
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Merge Divided Roads
| Version | Description |
|---|---|
10.5 | New parameter added: character_field |
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Propagate Displacement
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Remove Override
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Resolve Building Conflicts
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Resolve Road Conflicts
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Select Feature By Override
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Set Layer Representation
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
Set Representation Control Point At Intersect
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.3 | New at this version |
Set Representation Control Point By Angle
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
9.2 | New at this version |
Simplify Building
| Version | Description |
|---|---|
10.8 | New parameter added: in_barriers |
10.3 | Ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Simplify Line
| Version | Description |
|---|---|
10.7.1 | Parameter algorithm had new option added: EFFECTIVE_AREA |
10.5 | New parameter added: in_barriers Legacy parameters that are no longer used: error_resolving and error_checking_option Environment added: Cartographic Partitions |
10.3 | Ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Simplify Polygon
| Version | Description |
|---|---|
10.7.1 | Parameter algorithm had new option added: EFFECTIVE_AREA |
10.5 | New parameter added: in_barriers Legacy parameters that are no longer used: error_resolving and error_checking_option Environment added: Cartographic Partitions |
10.3 | Ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Smooth Line
| Version | Description |
|---|---|
10.8 | Parameter error_option had new option added: RESOLVE_ERRORS |
10.7 | New parameter added: in_barriers |
10.3 | Ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Smooth Polygon
| Version | Description |
|---|---|
10.8 | Parameter error_option had new option added: RESOLVE_ERRORS |
10.7 | New parameter added: in_barriers |
10.3 | Ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Strip Map Index Features
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Thin Road Network
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Tiled Labels To Annotation
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | New at this version |
Update Override
| Version | Description |
|---|---|
10.3 | Not ported to ArcGIS Pro 1.0 |
10.0 | License changed from Advanced to Standard |
9.2 | New at this version |
About the toolbox history tables
At every release, Esri makes changes to existing tools and introduces new tools. These changes provide solutions to problems that were difficult to solve in previous releases and make tools more powerful and easier to use.
As an example of how you might use these history tables, suppose you are helping a colleague who is using version 10.2 while you're using version 10.3. You might suggest to your colleague that they use the Add Geometry Attributes tool to find point centroids of polygon features. The Add Geometry Attributes tool is found in the Data Management toolbox, and checking the Data Management toolbox history topic, you find that Add Geometry Attributes was not introduced until the 10.2.1 release. You can then suggest a 10.2 workflow of using the Feature To Point tool to find polygon centroids.
When changes are made to existing tools, every effort is made to maintain backward compatibility, meaning that the use of a tool in the previous release continues to work in the new release. That is, suppose you have a model or script written in version 10.2 that uses the Buffer tool. At version 10.3, the Buffer tool has a new optional parameter, method, with the default value of PLANAR. Your 10.2 script or model will work in 10.3 because the new method parameter is optional and its default value causes Buffer to work exactly the same way it did in 10.2.
Esri strives to maintain backward compatibility. However, it's not always possible due to the new functionality being introduced. Here are the cases where backward compatibility may break:
- If a parameter was removed, old workflows that used the parameter will no longer work.
- If a parameter option was removed, old workflows that used the option may no longer work. In many cases, the option that was removed is replaced by another option and the tool knows what to do if the previous option was specified.
- If a parameter had a data type removed and your old workflow used inputs of that data type, the old workflow will not work in the new version.
- A license change may affect your workflow. Most license changes are downward (from Desktop Advanced to Desktop Standard, for example) which would not affect backward compatibility.
- An extension change may affect your workflow. Extension changes that affect existing workflows are rare.
- If a parameter's default value changed, it may affect your workflow. You'll need to examine your existing workflows to determine the effect of the default value change.
- If the order of parameters changed, scripts that use positional arguments may break.
Below is more information about changes cataloged in the history tables.
New at this version
The last row of each table always contains the release version at which the tool was introduced to the toolbox.
Ported / Not ported to ArcGIS Pro
If you're transitioning from ArcMap to ArcGIS Pro, you may need to know whether a tool in ArcMap is also available in ArcGIS Pro. The majority of tools found in version 10.3 were ported over to (that is, replicated and made available in) ArcGIS Pro version 1.0. Information about whether the tool was ported over from ArcMap to the ArcGIS Pro platform is usually contained in the first row of the table. Note that you can use the Analyze Tools For Pro tool to check whether your ArcMap models and scripts will run in ArcGIS Pro.
Parameter options
A parameter option (also referred to as an enumerator) is a string that affects tool execution. For example, the join_attributes parameter of the Intersect tool has three options: ALL, NO_FID, and FID_ONLY. New options appear occasionally from release to release, and options may be removed. An option introduced in a later version (such as 10.4) cannot be used in an earlier version (such as 10.3).
Sometimes you'll see an option removed and replaced with a very similar option, such as Euclidean distance replaced with EUCLIDEAN_DISTANCE. In cases like this, the tool is programmed to accept either option and backward compatibility is not broken.
New and removed parameters
New parameters are almost always added as the last parameter so backward compatibility is maintained in scripts. However, sometimes the new parameter must be inserted between existing parameters and compatibility in scripts may be broken—you may have to edit your script to run in the later version. If a new parameter is inserted between existing parameters, it will be noted as a change in parameter order.
Removed parameters are rare. Scripts that use the removed parameter will have to be changed, but models should continue to run.
Parameter default value changes
Optional parameters have a default value—the value that will be used unless you change it. If there is a change to a parameter's default value, it may affect your existing models and scripts.
Parameter data type changes
A data type defines the permissible values for a parameter, such as the type of datasets (features, tables, networks, and so on). If a data type is removed at a version, it means that the parameter no longer accepts the dataset as input or output. You may have to change your models and scripts if they use the removed data type.
Parameter order
New parameters are almost always added as the last parameter and don't affect the order of existing parameters. In rare cases, the order of existing parameters may change, and scripts that use positional arguments may break. Instead of using positional arguments, you can use keyword arguments as shown below. Models will still execute as they are not dependent on parameter order.
# Positional arguments - skipping optional arguments using empty strings is dependent on
# the order of the optional parameters
#
arcpy.AddField_management("schools", "school_id", "LONG", "", "", "", "", "NON_NULLABLE")
# Keyword arguments - position doesn't matter
#
arcpy.AddField_management("schools", "school_id", "LONG", field_is_nullable="NON_NULLABLE")
Parameter name case
The name of a parameter may change case, for example, from In_Features to in_features. This change only affects scripts that use keyword arguments. In Python, keyword arguments are case sensitive.
Parameter type
A parameter type may change from required to optional or from optional to required. Changing from optional to required may affect existing workflows.
Tool licensing and extension
A licensing or extension change may affect existing workflows.
Deprecated tool
See the topic What is a deprecated tool? for more information.