В таблицах ниже приводится перечень изменений, произведенных для каждого инструмента набора Network Analyst. На один инструмент приходится одна таблица. Вы можете щелкнуть на имени инструмента, чтобы перейти к связанной с ним странице. Дополнительную информацию по интерпретации содержания этих таблиц истории смотрите в разделе в конце этой главы.
Добавление поля в слой анализа
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.1 | New at this version |
Добавить положения
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.0 | Добавлены 2 новых параметра:
|
9.2 | Добавлены 3 новых параметра:
Удален параметр: snapcontrol |
9.1 | New at this version |
Построить сеть
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.2 | Добавлен новый параметр: out_network_dataset |
9.1 | New at this version |
Вычислить положения
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.0 | Добавлены 4 новых параметра:
|
9.2 | New at this version |
Копировать пройденные исходные объекты
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | New at this version |
Создать класс пространственных объектов поворотов
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.0 | Добавлен новый параметр: has_z |
9.1 | New at this version |
Путевой лист
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | Добавлены 3 новых параметра:
В параметре file_type добавлена новая опция: HTML |
10.0 | Добавлен новый параметр: output_layer |
9.3 | В параметре report_units добавлена новая опция: NauticalMiles |
9.1 | New at this version |
Слияние сети
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.0 | New at this version |
Найти ближайшие пункты обслуживания
| Версия | Описание |
|---|---|
10.4 | В параметре Travel_Mode удалена опция CUSTOM |
10.3 | Not ported over to ArcGIS Pro 1.0 Необходимый дополнительный модуль изменен с none на Network Analyst Добавлен новый параметр: Travel_Mode |
10.2.1 | New at this version |
Найти маршруты
| Версия | Описание |
|---|---|
10.3 | Not ported over to ArcGIS Pro 1.0 New at this version |
Создать области обслуживания
| Версия | Описание |
|---|---|
10.4 | В параметре Travel_Mode удалена опция CUSTOM |
10.3 | Not ported over to ArcGIS Pro 1.0 Необходимый дополнительный модуль изменен с none на Network Analyst Добавлен новый параметр: Travel_Mode |
10.2.1 | Добавлен новый параметр: Time_Zone_for_Time_of_Day |
10.2 | Добавлен новый параметр: Save_Output_Network_Analysis_Layer |
10.1 | New at this version |
Увеличить максимальное количество ребер
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.2 | Добавлен новый параметр: out_turn_features |
9.1 | New at this version |
Создать слой ближайшего пункта обслуживания
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | Добавлены 2 новых параметра:
|
10.0 | В параметре UTurn_policy добавлена новая опция: ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY |
9.1 | New at this version |
Создать слой размещения – распределения
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | Добавлены 2 новых параметра:
В параметре loc_alloc_problem_type добавлена новая опция: MAXIMIZE_CAPACITATED_COVERAGE |
10.0 | New at this version |
Создать слой матрицы Источник-Назначение
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | Добавлен новый параметр: time_of_day |
10.0 | В параметре UTurn_policy добавлена новая опция: ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY |
9.1 | New at this version |
Создать слой маршрута
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.0 | В параметре UTurn_policy добавлена новая опция: ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY |
9.2 | Добавлен новый параметр: start_date_time |
9.1 | New at this version |
Создать слой области обслуживания
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | Добавлены 2 новых параметра:
|
10.0 | В параметре UTurn_policy добавлена новая опция: ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY |
9.2 | Добавлены 3 новых параметра:
|
9.1 | New at this version |
Создать слой задачи выбора маршрута транспорта
| Версия | Описание |
|---|---|
10.3 | Not ported over to ArcGIS Pro 1.0 |
10.0 | В параметре UTurn_policy добавлена новая опция: ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY |
9.3 | New at this version |
Заполнить поля альтернативных ID
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.2 | Добавлен новый параметр: out_network_dataset |
9.1 | New at this version |
Расчет
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
10.1 | Добавлен новый параметр: simplification_tolerance |
10.0 | Добавлены 2 новых параметра:
|
9.2 | Добавлен новый параметр: ignore_invalids |
9.1 | New at this version |
Рассчитать Размещение-Распределение
| Версия | Описание |
|---|---|
10.4 | В параметре Travel_Mode удалена опция CUSTOM |
10.3 | Not ported over to ArcGIS Pro 1.0 New at this version |
Решить задачу выбора маршрута транспорта
| Версия | Описание |
|---|---|
10.3 | Not ported over to ArcGIS Pro 1.0 Добавлены 2 новых параметра:
|
10.1 | New at this version |
Таблица поворотов в класс пространственных объектов поворотов
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.1 | New at this version |
Обновить параметр атрибута слоя анализа
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.2 | New at this version |
Обновить по полям альтернативных ID
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.2 | Добавлен новый параметр: out_network_dataset |
9.1 | New at this version |
Обновить по геометрии
| Версия | Описание |
|---|---|
10.3 | Ported over to ArcGIS Pro 1.0 |
9.2 | Добавлен новый параметр: out_turn_features |
9.1 | New at this version |
Обновить данные трафика
| Версия | Описание |
|---|---|
10.4 | Опции provider для NAVTEQ изменены на HERE. Например, NAVTEQ North America изменена на HERE North America. |
10.3 | Not ported over to ArcGIS Pro 1.0 |
10.2.1 | Добавлен новый параметр: speed_unit |
10.2 | В параметре provider добавлена новая опция: INRIX |
10.1.1 | В параметре provider добавлена новая опция: NAVTEQ South East Asia |
10.1 | New at this version |
Обновить инциденты трафика
| Версия | Описание |
|---|---|
10.4 | Опции provider для NAVTEQ изменены на HERE. Например, NAVTEQ North America изменена на HERE North America. |
10.3 | Not ported over to ArcGIS Pro 1.0 В параметре provider добавлена новая опция: NAVTEQ Oceania |
10.1 | New at this version |
Обновить сеть
| Версия | Описание |
|---|---|
10.1 | Deprecated |
10.0 | New at this version |
About the toolbox history tables
At every release, Esri makes changes to existing tools and introduces new tools. These changes provide solutions to problems that were difficult to solve in previous releases and make tools more powerful and easier to use.
Esri strives to maintain backward compatibility. However, it's not always possible due to the new functionality being introduced. Here are the cases where backward compatibility may break:
- If a parameter was removed, old workflows that used the parameter will no longer work.
- If a parameter option was removed, old workflows that used the option may no longer work. In many cases, the option that was removed is replaced by another option and the tool knows what to do if the previous option was specified.
- If a parameter had a data type removed and your old workflow used inputs of that data type, the old workflow will not work in the new version.
- A license change may affect your workflow. Most license changes are downward (from Advanced to Standard, for example) which would not affect backward compatibility.
- An extension change may affect your workflow. Extension changes that affect existing workflows are rare.
- If a parameter's default value changed, it may affect your workflow. You'll need to examine your existing workflows to determine the effect of the default value change.
- If the order of parameters changed, scripts that use positional arguments may break.
Below is more information about changes cataloged in the history tables.
New at this version
The last row of each table always contains the release version at which the tool was introduced to the toolbox.
Parameter options
A parameter option (also referred to as an enumerator) is a string that affects tool execution. For example, the join_attributes parameter of the Intersect tool has three options: ALL, NO_FID, and FID_ONLY. New options appear occasionally from release to release, and options may be removed. An option introduced in a later version (such as 10.4) cannot be used in an earlier version (such as 10.3).
Sometimes you'll see an option removed and replaced with a very similar option, such as Euclidean distance replaced with EUCLIDEAN_DISTANCE. In cases like this, the tool is programmed to accept either option and backward compatibility is not broken.
New and removed parameters
New parameters are almost always added as the last parameter so backward compatibility is maintained in scripts. However, sometimes the new parameter must be inserted between existing parameters and compatibility in scripts may be broken—you may have to edit your script to run in the later version. If a new parameter is inserted between existing parameters, it will be noted as a change in parameter order.
Removed parameters are rare. Scripts that use the removed parameter will have to be changed, but models should continue to run.
Parameter default value changes
Optional parameters have a default value—the value that will be used unless you change it. If there is a change to a parameter's default value, it may affect your existing models and scripts.
Parameter data type changes
A data type defines the permissible values for a parameter, such as the type of datasets (features, tables, networks, and so on). If a data type is removed at a version, it means that the parameter no longer accepts the dataset as input or output. You may have to change your models and scripts if they use the removed data type.
Parameter order
New parameters are almost always added as the last parameter and don't affect the order of existing parameters. In rare cases, the order of existing parameters may change, and scripts that use positional arguments may break. Instead of using positional arguments, you can use keyword arguments as shown below. Models will still execute as they are not dependent on parameter order.
# Positional arguments - skipping optional arguments using empty strings is dependent on
# the order of the optional parameters
#
arcpy.AddField_management("schools", "school_id", "LONG", "", "", "", "", "NON_NULLABLE")
# Keyword arguments - position doesn't matter
#
arcpy.AddField_management("schools", "school_id", "LONG", field_is_nullable="NON_NULLABLE")
Parameter name case
The name of a parameter may change case, for example, from In_Features to in_features. This change only affects scripts that use keyword arguments. In Python, keyword arguments are case sensitive.
Parameter type
A parameter type may change from required to optional or from optional to required. Changing from optional to required may affect existing workflows.
Tool licensing and extension
A licensing or extension change may affect existing workflows.
Deprecated tool
See the topic What is a deprecated tool? for more information.